TurfSoccer artificial turf stadium Guide

Stain removal

Most stain-resistant fibers polyethylene fiber is well-known because most tainted produce is wet, but polyethylene does not absorb moisture. "Stain" on the most polyethylene fibers with water or soapy water.

1. With the fiber brush to remove the solid waste

2. Scrub with soap and water

3. Rinse thoroughly with soapy water with water

4. If it is necessary to use highly absorbent towel dry

Note: Do not use more than 300psi powerful jet shooting water, which will damage the grass.

TurfSoccer artificial turf stadium Guide

TurfSoccer artificial turf factory recommended: Can not load more than 3psi, movement on the surface of the load must not exceed 35psi. Allow a certain limited number of chairs in the graduation ceremony and other important activities as the continuous use of the facilities on the site.

The snow and ice will not affect the artificial grass, usually melt on its own and from the venue. As much as possible in the time away from the game nearly time to remove the snow, which can to again prevent snow and cold in the humid air will freeze to lead to re-clean the floor. Quite difficult because the removal of the ice, it is particularly important to prevent icing.